Armrest Cover Installation (Optional Accessory) - Champion Augustine Owner's Operating And Maintenance Manual

ARMREST COVER INSTALLATION (OPTIONAL ACCESSORY)

NOTE: Cover designs will vary based on chair options (i.e. tables, heat/massage, etc.)
CHAIRS WITH SIDE TABLES
1. Raise the side table by grasping the center of the table and gently lift into place.
2. Locate large square opening in cover and position over the side table. Stretch the opening over the side table
and slide over side table.
3. Fit the front portion of the Armrest cover over the front of the arm. Pull down tight for best fit.
4. Fit the rear portion of the Armrest cover over the rear of the arm.
5. Smooth wrinkles.
6. Make sure openings align with release handle.
NOTE: Covers are left-hand and right-hand specific. Make sure you are installing each cover on the correct
side.
FIG. 1
Page 11 of 31
manual
Document No.: 006340 - Revision: M
FIG. 4
FIG. 2
FIG. 5
FIG. 3
FIG. 6