On / Off - Unitron Stride V-PR User Manual

Volume control
To adjust the volume of your environment:
Push the upper part of the hearing aid
•
button to increase the volume, and
Push the lower part of the hearing aid
•
button to decrease the volume
As you change the volume, your hearing aids
will beep.
Volume setting
Suggested volume level
Turning volume up
Turning volume down
Maximum volume level
Minimum volume level
20
Beeps
1 beep
short beep
short beep
2 beeps
2 beeps

8. On / Off

Switch on the hearing aid
By default, the hearing aid is configured to
switch on automatically when removed from
the charger connected to the power supply. If
this function is not configured or if the charger
is not connected to the power supply, firmly
press and hold the lower part of the button for
3 seconds until the indicator light blinks. Wait
until the solid green light indicates that the
hearing aid is ready.
Switch off the hearing aid
Press and hold the lower part of the button for
3 seconds until the solid red light indicates the
hearing aid is switching off.
Blinking green
Solid red for 3 seconds
When you switch on the hearing aid you
might hear a start-up melody.
Hearing aid is switching on
Hearing aid is switching off
21