Get Started; Charge The Battery - Nokia BH-100 Manual

Get started

The headset contains the following
parts shown on the title page:
indicator light (1), power key (2),
microphone (3), charger connector
(4), answer/end key (5), and
changeable earloop (6).
Before using the headset, you must
charge the battery and pair the
headset with a compatible phone.
Parts of the headset are magnetic.
Metallic materials may be attracted to
the headset. Do not place credit cards
or other magnetic storage media near
the headset, because information
stored on them may be erased.
Chargers
Check the model number of any
charger before using it with this
device. The headset is intended for use
with the
AC-3, AC-4, and DC-4 chargers.
Warning: Use only
chargers approved by
Get other manuals
4
Nokia for use with this particular
enhancement. The use of any other
types may invalidate any approval or
warranty and may be dangerous.
For availability of approved
enhancements, please check with your
dealer. When you disconnect the
power cord of any enhancement,
grasp and pull the plug, not the cord.

Charge the battery

The headset has an internal,
nonremovable, rechargeable
battery. Do not attempt to remove
the battery from the device, as you
may damage the device.
1. When the back of the headset is
facing you, detach the earloop
from the left of the headset.
2. Connect the charger to a wall
outlet.
3. Connect the charger cable to
the charger connector (7). The
red indicator light is on while