Advertisement

Support and E-Warranty Certificate https://www.vevor.com/support
SWIMMING POOL PUMP
USR MANUAL
MODEL:HCP370A-D
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HCP370A-D and is the answer not in the manual?

Questions and answers

Summary of Contents for VEVOR HCP370A-D

  • Page 1 Support and E-Warranty Certificate https://www.vevor.com/support SWIMMING POOL PUMP USR MANUAL MODEL:HCP370A-D We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
  • Page 2: Swimming Pool Pump

    CustomerService@vevor.com This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
  • Page 3 IMPORTANT WARNING AND SAFETY SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS SAND FILTER IS NOT INSTALLED AND USED CORRECTLY. INSTALLERS,POOL OPERATORS,AND POOL OWNERS MUST READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE USING THIS SAND FILTER. This sand filter is intended for use in swimming pool applications. Most states and local codes regulate the construction,installation,and operation of public pools and spas and the construction of residential pools and spas.It is important to comply with these codes,many of which directly...
  • Page 4 Components such as the filtration system,pumps,and heater must be positioned so as to prevent being used as means of access to the pool by young children. Electrical ground all electrical equipment before connecting to the electrical power supply.Failure to ground all electrical equipment can cause a serious or fatal electrical shock hazard.
  • Page 5 separate,causing serious injury or major property damage. RISK OF ELECTRICAL SHOCK OR ELECTROCUTION: PUMPS REQUIRE HIGH VOLTAGE,WHICH CAN SHOCK,BURN,OR CAUSE DEATH. BEFORE WORKING ON THE PUMP! Always disconnect power to the pool pump at the circuit breaker from the pump before servicing the pump.Failure to do so could result in death or serious injury to the service person,pool users,or others due to electric shock.
  • Page 6: Assembly Diagram

    ASSEMBLY DIAGRAM Description Number Valve 1-1/2in.5-way Clamp Style Pressure Gauge O-ring,plug Plug,Pressure Gauge Valve Assembly O-ring,Valve Flange Clamp - 5 -...
  • Page 7 Screw Clamp Assembly Sand Shield Filter Tank Standpipe and Underdrain Assembly Drain Spigot O-ring,plug Drain Nut 0-ring,plug Drain Cap Drain Kit Hose Clamp Pump to Filter Hose Hose Adaptor 0-ring,Hose Adaptor Pump to Filter Assembly Pump Pump Base - 6 -...
  • Page 8: Filter Overview

    FILTER OVERVIEW Your high-rate sand filter is designed to produce clear,sparkling water and operate for years with a minimum of maintenance when installed,operated and maintained in accordance with these instructions. Your filter uses special filter sand to remove dirt particles from pool water. Filter sand is loaded into the filter tank and functions as the dirt-removing media.The pool water,which contains suspended dirt particles,is pumped through your piping system and is automatically directed by the filter...
  • Page 9: Specifications

    SPECIFICATIONS Model HCP370A-D AC110-120V,60Hz Nominal voltage 370W 3.0A PUMP Max.head 26ft Max.flow 3000GPH Protection class IPX5 Insulation class Filter Diameter 12” 0.073 ㎡ Effective filtration area Top Mount Filter Tank volume Required media type #20 silica sand Required media amount 20kg Max.Working pressure...
  • Page 10 Blockage of suction fittings can cause serious or fatal injury due to drowning.To reduce the risk of injury,do not permit children to use Never work on the pump while it is running or power is still connected.High voltage can cause serious or fatal injury.A suitable ground fault interrupter(GFCI)should always be installed at the power supply source of this unit.Be sure to ground the motor before connecting it to the electrical AC power supply.Failure to ground the...
  • Page 11 4.Place the filter tank on the system base and rotate clockwise a little bit.Position the filter tank,so the winter drain faces the opposite direction of the pump. 5.Assemble the pump to the system base. 6.Place the standpipe and underdrain assembly in the center of the tank.Cap the standpipe with a sand shield to prevent sand from entering it.Fill the tank with about half-full water.(Be sure the winter drain cap is securely in place).Carefully pour in the correct amount and grade of filter...
  • Page 12 High Pressure: Improper tank valve assembly could cause the valve to separate and cause serious injury and/or major property damage. 10.Wrap some Teflon pipe manufactured for the plastic pipe on the 14"NPT male end of the gauge.Carefully screw the pressure gauge into the 1/4"NPT tapped hole in the valve body.Do not over-tighten.
  • Page 13: Initial Start-Up

    used for start-up cleaning and resettling the filter bed after backwashing. WASTE:From the pump,through the valve,bypasses the filter and goes to the waste port.This position is for vacuuming directly to waste,lowering the pool level,or draining the pool. CLOSE:NO FLOWIN THIS POSITION-DO NOT USE THIS SETTING WHILE THE PUMP IS OPERATING.
  • Page 14 from the pool to the WASTE line.STAND CLEAR OF FILTER and start the pump. 7.Run the pump for at least two minutes. 8.Turn the pump off and set the valve to the“FILTER”position.Be sure that all pool suction and RETURN lines are open so that water is free to flow from and back to the pool.STAND CLEAR OF FILTER and start the pump.
  • Page 15 ·A more subjective and less accurate indicator is to observe the amount of water flowing from the flow directionals located in the wall of the pool.The filter should be back-washed once it is detected that the flow has been reduced. ·The most commonly used but less accurate indicator is to backwash when the filter gauge reading increases by 10 PSI over the initial(clean filter)reading.
  • Page 16 the“BACKWASH”position. 3.STAND CLEAR OF FILTER and start the pump. 4.Backwash filter for approximately 3 to 5 minutes or until backwash water is clean 5.Stop the pump and set the valve to the“RINSE”position. 6.STAND CLEAR OF FILTER and start the pump. 7.Rinse the filter for approximately 30 seconds.
  • Page 17 The multiport valve should be left in the“WINTER”position during the shutdown season.Failure to do so can damage the system,which can cause property damage from leaking water. 3.Remove the drain cap on the bottom of the filter tank and leave the cap off during winter.Completely drain the filter tank.
  • Page 18 Sand is flowing into the 1.Sand is too small. 1.Use#2O silica sand pool. 2.The level of the sand is 2.Lower the sand level to too high. 2/3 of the filter 3.Broken underdrain 3.Replace broken or assembly. damaged assembly. Higher filter pressure. 1.Insufficient Backwashing.
  • Page 19 Manufacturer:Ningbo HongTong Motor Co.,Ltd Address:No.28 Rongda Road,Lizhou Street Yuyao Ningbo Zhejiang 315400 CHINA Made In China - 18 -...
  • Page 20 Support and E-Warranty Certificate https://www.vevor.com/support...

Table of Contents