Dial And Buttons - Electrolux EW7WB764T4 User Manual

6.3 Multilingual badges

7. DIAL AND BUTTONS

7.1 Introduction
The options/functions are not available
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set
incompatible options/functions.
7.2 On/Off
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy consumption,
you may need to activate the appliance
again.
After the SensiCare System detection, it flashes when the laundry load exceeds the
maximum declared load of the selected programme. Refer to "The SensiCare Sys‐
tem load detection " paragraph.
Auto Dry indicator:
Iron dry
Cupboard dry
Extra dry
Child safety lock indicator.
Time Dry and Non-Stop programme indicator.
Adhesive badges in different languages are
supplied with the appliance.
The desired badge can be glued around the
programme dial.
For more details, refer to Stand-by paragraph
in Daily Use chapter.
7.3 Mode
Thanks to this button, a cycle can perform:
• Only washing: Mode - Wash indicator is
on (default mode).
• Washing and drying: Mode - Wash and
Mode - Dry indicators are on.
• Only drying: Mode - Dry indicator is on.
7.4 Temperature
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Tap on this button to change the water
temperature.
The indicator of the set temperature comes
on.
The indicator Cold corresponds to cold water.
ENGLISH 21