Table of Contents
Advertisement
^ Switch the ironer on.
When the ironer is switched on, the
heater plate heats up immediately.
The temperature selector must be
turned to the l setting.
^ Press the foot pedal and "iron" the
cloth into position.
Do not let the cords get under the cloth
as it turns.
After the roller has gone through three
or four revolutions and the end of the
ironing cover is under the heater plate:
^ Switch off the ironer while keeping
the foot pedal pressed down.
The ironing cover is held firmly in
place by the heater plate which is still
lowered.
Maintenance and care
^ Tighten the cords at the left and right
hand sides of the roller, tie together
and tuck in.
^ Put the feed-in table back in place.
^ Switch the ironer on – the heater
plate will rise up.
33
Advertisement
Table of Contents
