Product Overview; Controls - Toro 74741 Operator's Manual

Product Overview

1. Deflector
2. Rear drive wheel
3. Motion-control levers

Controls

Become familiar with all of the controls in
and Figure 5 before you start the engine and operate
the machine.
Control panel
1. Throttle
2. Choke
4. Height-of-cut lever
5. Operator seat
6. Smart Speed™ lever
Figure 4
Figure 5
3. Blade-control switch
(power takeoff)
4. Ignition switch
Figure 4
7. Footrest
8. Fuel-tank cap
9. Control panel
Ignition Switch
The ignition switch has 3 positions: O
S . The key turns to S
TART
R upon release. Turning the key to the O
UN
stops the engine; however, always remove the key
when leaving the machine to prevent someone from
accidentally starting the engine
Throttle Control
The throttle controls the engine speed and it has a
continuous variable setting from Slow to Fast
5).
Choke Control
Pull up on the Choke control until it stops to choke the
engine (Figure
for normal engine operation
g032603
Blade-Control Switch (Power
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades
14
10. Engine
11. Engine guard
12. Front caster wheel
and moves back to
TART
(Figure
5). Push down on the Choke control
g028166
, R , and
FF UN
position
FF
5).
(Figure
(Figure 5).