Installing The Adapter - Sharp HN-VA100U Operation Manual

Installing the Adapter

Installing the Adapter
Important: The adapter must be registered as explained on page 8
before it can be installed.
1
Plug the power cord of the additional adapter into the electrical outlet
where you wish to use it.
• It is recommended that you plug the adapter directly into an electrical
outlet. Plugging the adapter into a surge protector or other device may
impair performance. (The adapter has its own surge protection.)
• The POWER indicator on the adapter will blink orange and green while the
adapter starts up.
Do not plug the
adapter into the same
outlet as another AC
adapter or charger
10
Do not plug the
adapter into a power
strip with a built-in
noise filter
Do not plug the
adapter into the same
power strip as
another AC adapter
or charger