Movie Recording - Sharp Internet ViewCam VN-EZ1U Operation Manual

Basic Operations

Movie Recording

You can record moving subjects with sound. Before you start
recording, see pages 14 through 20 to prepare your Digital
Recorder.
Precaution:
• Do not try to record images with low battery power. It may
cause malfunctions.
1
Slide the POWER switch (1), set the Mode select
switch to MOVIE (2) and then rotate the lens body
toward CAMERA (3).
POWER
MOVIE
1
Note:
• If the warning indicator "NOT INITIALIZED" appears, format
the SmartMedia card by the Digital Recorder (see page 64).
23
3
STILL
2
2
Adjust the angle of the lens body to compose the
image on the LCD monitor.
3
Press the Shutter button to begin recording.
Notes:
• The Digital Recorder automatically chooses the correct shutter
speed for the lighting conditions. Note that the slow shutter
speed set for the poor lighting may cause small image shakes.
And the image on the LCD monitor will be adversely affected.
• Using the Digital Recorder under fluorescent lights, mercury
lamps or sodium-vapour lamps causes flickers on the
recorded images. Sometimes those lightings affect tint of the
images.
• The Movie Recording mode is factory preset to NORMAL. If
you want to record movies in higher picture quality or for a
long time, change the resolution setting by selecting one
of five modes (see pages 45 and 46).
MOVIE mode indicator
NORMAL NORMAL LAP ‰:‰‰:‰‰ LAP ‰:‰‰:‰‰
REM ‰:‰1:15 REM ‰:‰1:15
OCT.27.2‰‰‰ OCT.27.2‰‰‰
1‰:31 AM 1‰:31 AM
Recording time
NORMAL LAP ‰:‰‰:‰1
REM ‰:‰1:14
Remaning time