Warranty - Wessex RMX-500 Operations Manual And Parts Book

WARRANTY

Your Wessex product or equipment is warranted free from defect in workmanship or manufacture
for one year from date of purchase. Any parts which appear to us to be defective, either in material
or workmanship shall be replaced or repaired at no cost to the purchaser, subject to the following
conditions:
1. You should register your product within seven days of purchase via our Website:
www.wessexintl.com/warranty-registration
Alternatively if you prefer, please telephone Wessex International on 01264 345888.
2. Any failure in the machine should be reported in the first instance immediately to your
dealer, who will act on your behalf to resolve the matter to your satisfaction.
3. The defective parts will be returned by your dealer to us, accompanied by a full statement
describing the failure and the circumstances and conditions in which the failure occurred.
4. The following are specifically excluded from our terms of warranty:
a) Fair wear and tear, especially to belts, blades, bearings and bushes.
b) Damage caused through incorrect adjustment (see instructions).
c) Damage caused by neglect or lack of lubrication.
d) Damage caused by misuse or abuse, including impact damage to blades.
e) Damage caused whilst the machine is in transit.
f) Damage caused to the frame of the machine by running the machine with
unbalanced rotors, blades or blade bars.
g) Damage caused to the machine by use with loose nuts, bolts, screws or any other type
of fittings.
h) Please note that P.T.O. Shafts are not covered by the Wessex warranty.
i) Damage caused to the machine by impact or collision to the machine . Howsoever
caused.
5. The warranty is for the benefit of the first user only.
6. Wessex International decisions will be final and binding.
Note:
It is recommended that every machine is inspected after one hour of operation to check that
all nuts, bolts, screws or any other types of fixings are tight and any loose fixings or
components should be rectified as appropriate.
Further inspections should be carried out at regular intervals thereafter.
7