Table of Contents
Advertisement
Copy to Card
Use this setting to copy the files stored in
the built-in memory to a memory card.
Copy files from built-in memory to
If there is no card available in the
camera, this function will not be
displayed.
106
Copy to Card
the memory card.
No
Yes
File Numbering
After you take a picture or video clip,
the camera will save it with a sequential
number. You can use this to reset the file
numbering to 1.
File Numbering
Create a new directory and
reset the file number.
No
Yes
Advertisement
Table of Contents
Need help?
Do you have a question about the PIXPRO AZ652 and is the answer not in the manual?
Questions and answers
Hi, the LCD will not display, it lights up intermittently.
The intermittent LCD display issue on the Kodak PIXPRO AZ652 could be caused by the following reasons:
1. Accidental EVF Switching – If the EVF/LCD toggle button is pressed, the display may switch between the LCD and EVF, causing intermittent display issues.
2. Loose or Faulty LCD Connection – Excessive force while rotating the vari-angle LCD may damage the connection, leading to display problems.
3. Interference or Internal Malfunction – If the camera experiences interference or an internal hardware issue, it may cause the LCD to turn on and off unexpectedly.
To troubleshoot, ensure the EVF/LCD toggle button is not being accidentally pressed, avoid applying excessive force to the LCD, and check if the issue persists consistently.
This answer is automatically generated