Configuring The System Board - Sony VAIO Digital Studio PCV-RX260DS Reference Manual

Configuring the System Board

The system board contains a CMOS Clear configuration jumper, and two
sets of reserved jumper blocks (do not change).
The CMOS and Non-Volatile RAM (NVRAM) settings are only cleared if
the checksum test returns false. Access to specific setup fields is
controlled by a supervisor password or user password.
The Clear CMOS mode removes the password that is stored in CMOS. No
other parameters are cleared.
The configuration jumpers should never need changing unless otherwise directed by a
technical support or service technician.
!
Before opening the system, save any open files, exit the Microsoft
®
Windows operating system, turn off the power of the computer and all
attached peripherals, and unplug the power cord.
1
Remove the side cover (see
2
Set the jumpers as directed by a service technician (also see
"Configuration Jumper"
3
Reinstall the side cover (see
20
"Removing the Side Cover"
on page 61).
"Replacing the Side Cover"
®
on page 22).
1 2 3
Reserved (do not change)
Reserved (do not change)
CMOS CLR
= default jumper
1-2 2-3
CMOS Clear
Normal Clear
on page 23).
OM04588.VSD