Samsung NX58M5600S Series Installation Manual page 36

3. Press the START/SET pad.
The display will show a blinking •, along with 150 °, Bake,
and the bake element icon, until the oven reaches that
temperature; then the display will just show the actual
oven temperature.
The oven will automatically light after 30~90 seconds and
start preheating.
When the oven reaches the desired baking temperature,
it will beep 6 times.
4. Press the OFF/CLEAR pad to shut off the oven.
The display will show the time of day.
The oven burners require electrical power to operate.
They cannot be lit manually with a match, so the oven
cannot be used during power outages.
To start the broil burners:
To check ignition of the broil burner, touch the Broil Hi/Lo
Pad and then the start pad. After 30~90 seconds, the broil
burner will ignite.
Checking the flame quality:
All combustion flames need to be visually checked to determine their flame
quality.
1. Soft blue flames—Normal for natural gas operation.
2. Yellow tips on outer cones—Normal for LP gas
operation.
3. Yellow flames—Abnormal for any gas operation; call
for service.
If burner flame looks like 3, the range should not be
used until it is serviced. Call for service. Normal burner
flames shall look like 1 or 2, depending on the gas
type you use.
36_ installation instructions