Loading And Unloading/Transporting Management/Storage Requirements - Haier 1U25YAMFRA Installation Manual

CAUTION
Do not install the air conditioner at any place where there is danger of flammable gas leakage.
In the event of a gas leakage, build-up of gas near the air conditioner may cause a fire to break out.
Tighten the flare nut according to the specified method such as with a torque wrench. If the flare nut
is too tight, it may crack after prolonged use, causing refrigerant leakage.
Take adequate steps to prevent the outdoor unit being used as a shelter by small animals. Small
animals making contact with electrical parts can cause malfunctions, smoke or fire.
Please instruct the customer to keep the area around the unit clean.
The temperature of refrigerant circuit will be high, please keep the inter-unit wire away from copper
pipes that not thermally insulated.
Only qualified personnel can handle, fill, purge and dispose of the refrigerant.

Loading and Unloading/Transporting Management/Storage Requirements

1) The products shall be carefully handled during loading and unloading.
2) Do not give impact to the indoor and outdoor units, or otherwise product damage may result.
3) Be sure to read the safety cautions before conducting any work.
4) Dry powder extinguishers or other suitable fire extinguishing apparatus should be equipped at the
loading area.
5) Untrained personnel cannot be engaged in loading and unloading of air conditioners with
flammable refrigerants.
6) Smoking and open fire are not allowed around the air conditioner.
Transporting Management Requirements
1) The maximum transporting volume of finished products shall be determined as per local
regulations.
2) The vehicles used for transporting shall be operated as per local laws and regulations.
3) Dedicated after-sales vehicles shall be used for maintenance transportation, and exposed
transporting of refrigerant cylinders and the products to be maintained is not allowed.
4) A rain cover or similar shield material of the transporting vehicles should have certain flame
retardancy.
5) Leakage warning device of flammable refrigerant shall be installed inside the closed-type
compartment.
6) Anti-static device shall be equipped inside the compartment of transporting vehicles.
7) Dry powder extinguishers or other suitable fire extinguishing apparatus shall be equipped inside the
diver's cap.
8) The transporting vehicles shall run at a constant speed, and heavy acceleration/deceleration shall
be avoided.
9) High-temperature area shall be avoided during transporting, and necessary radiating measures shall
be taken in case the temperature inside the compartment is too high.
Storage Requirements
1) The storage package of equipment used shall be such that no leakage of refrigerant will be caused
due to mechanical damage of the equipment inside.
2) The maximum quantity of the equipment allowed to be stored together shall be determined as per
local regulations.
:
2