Table of Contents
Advertisement
Description
The W240 Weed Wiper is designed for the selective application of herbicide to weeds / vegetation on
pasture.
The W240 Weed Wiper is a trailed attachment, with applicator roller rotated around a horizontal plane in
direction counter to the direction of motion. This ensures even coverage of the waterborne herbicide to
the underside of the weeds. The herbicide itself is applied to the applicator roller via sprayer nozzles
located above, fed from a tank and pump fitted to the top of the machine.
These machines should however only be used to perform tasks for which they were designed - use of the
machine for any other function may be both dangerous to persons, and potentially damaging to
components. Use of the machine beyond the stated usage may invalidate any applicable warranty, as well
as being potential in breach of applicable safety regulations.
Weed wiping using herbicide is a controlled practice, and as such should only be undertaken by
operators with the correct licences / tickets for the territory the machine is being used in!
Identification
Each machine is fitted with a serial plate (shown below) which details the following:
1.
Model
2.
Date of Manufacture (DOM)
3.
Serial Number
4.
Mass
When enquiring regarding spares or additional
equipment, ensure you have this information to hand.
Implement Decals
If your implement does not contain all of the decals shown below, please contact Chapman Machinery for
replacement decals before use. Note: All decals must be present and visible. It is imperative that these are replaced
if damaged to prevent potential harm to users.
Page 5
Advertisement
Table of Contents
