Advertisement
User Guide
LAYOUT DENSITY
GUIDELINES
CONNECTION GUIDE
CONNECTION WITH
POWER SUPPLY
STAR C04
Use recommended length for pitch between each module to achieve optimum lighting output while maintaining lowest unit
cost. Failure or misplacing will cause dimmed spots or uneven appearance of light on the surface.
RECOMMENDED PITCH PER DEPTH
100 mm
80 mm
70 mm
RECOMMENDED LAYOUT DENSITY PER CHANNEL WIDTH
80 mm
200 mm
Maximum driver quantity per serial connection is limited. Using more quantity per run will cause overload from SMPS which
damages all connected products. This will cause voltage drop and also dimmed lighting output.
AC Input
DC Output
CAUTION
Keep extension lead
wires as short as possible.
Refer to below table for
EXTENSION OF POWER SUPPLY LEAD WIRES
Model Name
PSCS-0030-12
Output (W)
30W
Output (A)
2.5A
Max Q'TY - White*
22pcs
Max Q'TY - Colors*
33pcs
Recommended
VCTF1.25
Extension Wire
AWG18
Maximum Length
5M (15FT)
**PSCS-0600-12, PSCS-1000-12 are not weather-proof
Equip with protective box for outdoor use and the box should have ventilating holes
FARD lighting GmbH
Seestrasse 20
Tel. +49 - (0)3378 / 2003-0
info@fard-lighting.de
120 mm
100 mm
400 mm
Make sure that each run should have 50 modules at max
and should use another run in parallel to connect more
Power Supply
Should use thicker wires which can take larger amount of current
than the amount transmitted from the power supply unit
1st
1st
2nd
2nd
49th
49th
50th
50th
PSCS-0060-12
PSCS-0120-12
60W
5A
43pcs
66pcs
VCTF2.0
AWG14
5M (15FT)
D - 14974 Ludwigsfelde OT Genshagen
Fax +49 - (0)3378 / 2003-29
www.fard-lighting.de
200 mm
120 mm
Use 10% to 20% shorter length
than usual for circular arrange
316 mm
1st
1st
2nd
2nd
49th
49th
50th
50th
PSCS-0600-12**
120W
600W
10A
50A
85pcs
450pcs
131pcs
650pcs
VCTF2.0
VCTF5.5
AWG12
AWG4
5M (15FT)
15M (50FT)
2
150 mm
1st
2nd
PSCS-1000-12**
1000W
83A
750pcs
1090pcs
VCTF8.0
AWG2
15M (50FT)
Advertisement
