SCREWS AND TOOLS
Recommended tools and equipment
•
Stepladder
•
Drill
•
Torx T20 bit
•
Hex 4 mm bit
•
Appropriate drill bits for your wall material
•
Appropriate wall fasteners/anchors for your wall construction
•
Laser level and/or spirit level
•
Measuring tape
•
Pencil
D15514.01 | 2023 OCTOBER | Cisco Room Kit EQX Installation Guide
Screws and spacers
The following screws and spacers are shipped with the product. They are in boxes A, B, D, and
Acc
2, as further detailed in each step throughout this guide.
(M6x12, Hex 4 mm)
(M6x8, Hex 4 mm)
8+0+0+0 pcs.
12+8+8+0 pcs.
(Plastic washer)
(Sliding nut)
0+0+66+0 pcs.
16+0+0+0 pcs.
In addition:
•
The installer must bring the number and type of screws required for a safe wall mounting of
the system
(step 1
and
step
2).
Tools
The following tools are shipped with the product. You find them in box A.
Hex 4 mm
Torx T20
5
(M4x8, Torx T20)
(M4x10, Torx T20)
4+21+0+4 pcs.
0+12+70+0 pcs.
Copyright © 2023 Cisco Systems, Inc. All rights reserved.