Table of Contents
Advertisement
HANDLE INSTALLATION
CAUTION
Wear gloves and use extreme CAUTION when installing
these handles. The rounded end of the handles may be
sharp.
IMPORTANT
To ensure proper installation of handles, please review
these instructions and illustrations thoroughly prior to
installing the handles.
Additionally, before installing the door handles, make
sure the door swing is correct. Your model will have
either a right hand or left hand door swing. Follow
instructions in the Use & Care Guide to reverse the
doors, if necessary.
To attach metal refrigerator handle:
1 Place rounded part of handle onto shoulder screw
on face of door and align the two (2) holes in top
of handle with the two (2) holes in top of door. Do
not tighten the set screw yet.
2 Install the two (2) screws into the top of the handle.
3 Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
6
To attach metal freezer handle:
1 Place rounded part of handle onto shoulder screw
on face of door and align the two (2) holes in
bottom of handle with the two (2) holes in bottom
of door. Do not tighten the set screw yet.
2 Install the two (2) screws into the bottom of the
handle.
3 Tighten the set screw on the rounded part of the
handle until the handle is flush with the door, then
tighten another 1/2 turn.
Stainless Steel Models
IMPORTANT
Stainless steel handles and doors are not reversible.
Advertisement
Table of Contents
