Philips S9712 User Manual page 22

ENGLISH
22
6 Pull the trimmer attachment straight off the
appliance.
Note: Do not twist the trimmer attachment while you
pull it off the appliance.
7 Insert the lug of the shaving unit into the slot
in the top of the appliance. Then press down
the shaving unit to attach it to the appliance
('click').
Using the beard styler attachment
1 Make sure the appliance is switched off.
2 Pull the shaving unit straight off the appliance.
Note: Do not twist the shaving unit while you pull it off
the appliance.
3 Insert the lug of the beard styler
attachment into the slot in the top of the
appliance. Then press down the beard styler
attachment to attach it to the appliance
('click').
Using the beard styler attachment with comb
You can use the beard styler attachment with the
comb attached to style your beard at one fixed
setting, but also at different length settings.
The hair length settings on the beard styler
attachment correspond to the remaining hair
length after cutting and range from 1 to 5mm.