Pulsar PSDIN2 Quick Start Manual

Holder din/ps/psb2

1. Description.

The PSDIN2 holder is designed as an accessory for the following power supply units: PSB15512110,

PSB1552455, PSB1002435, PSB1001270, PS15012100, PS1502450, PS1001270. The PSDIN2 allows the

mounting of the abovementioned power supplies onto the DIN rail. Included with the holder is a set of screws (5 ea.

M3x4) for mounting of the power supply to the holder.

The PSDIN2 holder should be mounted in an enclosed space (inside the case), with normal humidity

(RH=90% maximum without condensation) and a temperature in the range of -10°C to +40°C. Free flow of air

Before beginning installation, ensure that the power in the 230V AC power supply circuit is

All service and maintenance should be performed with the 230V AC power supply

1. Before beginning installation, ensure that the power in the 230V AC power supply circuit is

disconnected.

2. The power supply is to be mounted to the PSDIN2 holder using the M3 screws included with the holder.

3. The power supply is to be mounted onto the DIN rail together with the holder.

4. Electrical connection should be performed according to the power supply instructions.

Holder DIN/PS/PSB2

Edition: 4 from 07

Supercedes edition: 3 from 29

around the power supply should be ensured.

disconnected.

Fig. 1. View of the PSDIN2 holder.

PSDIN2

v1.1

February 2012

September 2011

Table of Contents

Do you have a question about the PSDIN2 and is the answer not in the manual?

Page 1 1. Before beginning installation, ensure that the power in the 230V AC power supply circuit is disconnected. 2. The power supply is to be mounted to the PSDIN2 holder using the M3 screws included with the holder. 3. The power supply is to be mounted onto the DIN rail together with the holder.
Page 2 - 5 x M3x4 GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (manufacturer) grants a two-year quality warranty for the equipment, starting from the date of purchase placed on the purchase order. 2. Should such purchase order be missing when the claim is submitted, the three-year guarantee period is counted from the date of the manufacturing of the device.