Connect The Soundbar And Subwoofer; Pair The Subwoofer Manually - Philips 5000 Series User Manual

Connect the soundbar and
subwoofer
Connect the soundbar and
subwoofer through Bluetooth
• The subwoofer will be connected with
the soundbar via Bluetooth signal.
• The subwoofer's indicator will blink red
before connected with the soundbar,
and will turn solid blue after connected
with the soundbar.
• If the soundbar and the subwoofer
have been paired before, when you
again plug in and power on the
soundbar, the subwoofer will be
automatically paired with the soundbar
with normal sound output and solid
blue indicator. And the subwoofer will
go into standby automatically after the
soundbar is powered off.

Pair the subwoofer manually

• If no audio is heard from the subwoofer
or the subwoofer's indicator does not
turn blue, follow the steps below to
reset and pair up the subwoofer again:
1. Press the PAIR button on the
subwoofer when the subwoofer is
in Disconnected status (subwoofer's
indicator blinks red slowly, once per
second), and then the subwoofer's
indicator will blink red quickly (twice
per second).
2. Switch the soundbar source to
AUX, and then press and hold
the soundbar for five seconds. The
soundbar will reset and go into standby
automatically.
3. Press on the soundbar. The
soundbar will pair with the subwoofer
automatically. The connection is
successful when the subwoofer's
indicator turns solid blue.
Note: Once the soundbar is reset, you
should clear the Bluetooth device list in
your phone before you pair your phone
with the soundbar.
When the soundbar and subwoofer
are connected, you can press and hold
and + (Volume) on the soundbar
for five seconds to disconnect them.
Subwoofer indicator
Pairing: Fast blinking red
Connected: Solid blue
Disconnected: Slow blinking red
Standby: Solid red
on
EN
7