1100 Integrated Camera - Lenovo IdeaPad Tablet K1 Hardware Maintenance Manual

IdeaPad Tablet K1 Hardware Maintenance Manual

1100 Integrated camera

For access, remove these FRUs in order:
• "1010 Base cover" on page 31
• "1020 Battery pack" on page 33
• "1030 Middle cover" on page 34
• "1040 Docking bracket" on page 35
• "1050 System board" on page 36
• "1060 Switch board, SD board and HDMI board" on page 38
• "1070 Speaker" on page 41
• "1080 Optical finger navigation (OFN) module" on page 42
• "1090 Panel support bracket" on page 43
Figure 10. Removal steps of integrated camera
Note: Remove one screw , and then remove the integrated camera from the
1
LCD cover in the direction shown by arrow .
2
1
2
Step Screw (quantity) Color Torque
M4.5 x 3 mm, flat-head, nylon-coated (1) Silver 1.5-2.0 kg/cm
1
When installing: Stick the integrated camera to the top center of the LCD
cover and ajust the placement of it to make sure the connector is attached
firmly.
44