Chapter 2 Setup and Operation Procedures
2.3 Checking the Setting Information
2.3.3
Setting Information of the Key Management Function for the Drive
To check the setting information of the key management function for each drive, follow the procedure below.
Procedure
1
Log in to the remote panel.
2
Move to the [Status > Security] screen.
In [Drive Encryption Status], if "Enabled" is displayed for [Encryption], the key management
function of the drive is enabled. If "Disabled" is displayed for [Encryption], the key manage-
ment function is disabled, and the key management function follows the backup software
setting.
Figure 2.42 [Status > Security > Drive Encryption Status] screen
FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
61
Copyright 2019 FUJITSU LIMITED
End of procedure
P3AG-3762-02ENZ0