Philips S99 Series Manual page 36

ENGLISH
36
Problem
Water is leaking
from the bottom
of the shaver.
The SmartClean
system does not
work when I press
the on/off button.
The shaver is
not entirely clean
after I clean it in
the SmartClean
system.
Possible cause
During cleaning, water
may collect between
the inner body and the
outer shell of the shaver.
The SmartClean system
is not connected to the
mains.
You have not
placed the shaver in
the SmartClean
system properly, so
there is no electrical
connection between
the SmartClean system
and the shaver.
The cleaning cartridge
needs replacement.
The cleaning cartridge is
empty.The replacement
symbol flashes to
indicate you have to
replace the cleaning
cartridge.
You have used another
cleaning fluid than the
original Philips cleaning
cartridge.
Solution
This is normal and not
dangerous because all
electronics are enclosed in a
sealed power unit inside the
shaver.
Put the small plug in
SmartClean system and put the
adapter in the wall socket.
Press down the top cap ('click')
to ensure a proper connection
between the shaver and the
SmartClean system.
Replace the cleaning cartridge
(see chapter 'Cleaning and
maintenance').
Place a new cleaning cartridge
in the SmartClean system
(see chapter 'Cleaning and
maintenance').
Only use the Philips cleaning
cartridge.