Installation Steps - Philips DDL193LAFCG/97 User Manual

Installation Steps

To drill the needed
1
holes in the door
as per the drilling
template,then mount
the mortise on the
door frame.
Pass the connecting cable through
4
the hole above the door. Align
the square shaft of the outside
escutcheon with the two rotary
holes on the mortise, then
insert the square shaft into the
rotary holes, so that the outside
escutcheon is close fit in the outside
door.
6
Fasten the 4 anchor
2
screws in the
mortise.
Attention
The latch bolt can't be poped
up during installation.
To install the connecting
3
screw tubes on the outside
escutcheon, and put the
compressed spring and
square shaft accordingly
into the square shaft
holes.
M6 Connecting
Screw Tube
Front Bluetooth
Connecting Cable Escutcheon
Attention
Please use the appropriate
square shaft and connecting
tubes with proper length.
First fix the mounting plate
5
against the inner surface of the
door, and fasten it with 4 M5
connecting screws, and then fix the
upper mounting plate with M6
connecting screws.
Connecting Cable
M5 Connecting
Screw Tube
Mortise Connecting
Cable
Escutcheon
Connecting Cable
Front Bluetooth
Connecting Cable