Installing The Video Drivers And Utilities; Installing Ms-Dos Video Driversand Utilities - Epson Powerspan 2 User Manual

You might want to use several of these features together,
depending on the level of security you need for your computer.
For example, if you rarely plan to leave the computer
unattended, you may use only the keyboard/ mouse lock
button. However, if you plan to operate the computer in a
remote location, you may want to set the main system board
jumpers and lock the cover and front panel door. Try the
combination of features that is best for you.

Installing the Video Drivers and Utilities

Your system includes video drivers for certain versions of
popular MS-DOS application programs and for Windows 3.1,
as well as several MS-DOS video utilities. These drivers and
utilities, as well as installation programs for them, are
contained on the two Video Drivers diskettes.
After you have configured your system, you should install the
video drivers for the application programs you plan to use so
you can take full advantage of your video controller's
capabilities.
Follow the instructions in this section to run the video driver
installation programs. Then see the README.TXT file on each
Video Drivers diskette for additional information about the
drivers on the diskette.

Installing MS-DOS Video Driversand Utilities

Follow these steps to run the MS-DOS video drivers and
utilities installation program :
1. Insert the Video Drivers diskette for MS-DOS applications in
Drive A.
2. At the MS-DOS prompt, type A:
4-24 Using Your Computer
and press
INSTALL
Enter.