Maintenance; Replacing The Battery - HAMPTON BAY P5100-01-06 Use And Care Manual

Installation (continued)
3
Installing the solar lights
NOTE: Do not use a hammer to install the ground
stakes. This could cause damage to the solar lights.
□
Prepare a hole in the ground for each solar light.
Use a tool such as a screwdriver to prepare the
installation hole to ensure that the hole is not larger
than the ground stake (C).
□
Insert the solar light assembly into the prepared
hole.

Maintenance

REPLACING THE BATTERY

WARNING: Only use NiMh rechargeable batteries
with these solar lights. Do not mix battery types.
CAUTION: Do not use a smaller mAh battery as it
will affect performance. Larger mAh batteries are
acceptable. Ensure you have positioned the
batteries with the correct polarity (+) and (-).
NOTE: Battery performance is affected by weather
and temperature. Expect reduced performance in
adverse conditions of cold, extreme cold, extreme
heat, plus humidity and dampness.
□
Twist off the top of the solar light assembly and remove the battery cover.
□
Remove the old batteries and clean the battery contacts on the new batteries and the solar lights.
□
Replace with new AA 1.2V 1000 mAh NiMh rechargeable batteries.
□
Replace the battery cover.
□
Twist the top of the solar head back onto the top of the solar light assembly.
5
Please contact 1-855-HD-HAMPTON for further assistance.
C
WWW.HAMPTONBAY.COM