Table of Contents
Advertisement
4. USB docking display
introduction
Philips USB-docking monitors deliver
universal port replication, for a simple,
clutter-free, notebook connection.
Securely connect to networks, transmit
data, video and audio from laptop only
using a single USB cable.
Even more, dock with USB Type-C port
for extra power delivery. For docking
monitors with built-in DisplayLink
Technology, users can benefit from
forward and backwards compatibility of
USB with virtually any latest notebook.
4.1 How to operate USB docking
display through USB-C to C
cable?
1. Connect the USB C-C cable to the
USB-C port on the monitor and to
your laptop. It can transmit video,
audio, data, network, power through
USB-C cable.
2. Make sure [USB-C] is selected in the
input source list.
USB Type-C
Note
1. Ensure your source device compatible
DP Alt Mode over the USB type C to C
cable.
2. Only USB-C port supports USB docking
function.
≥15W
4.2 How to operate USB docking
display through USB-C to A
cable?
If your laptop doesn't have USB-C
port, connect the USB C-A cable to the
USB-C port on the monitor and to your
laptop, waiting for a couple of minutes, it
will automatically install the DisplalyLink
Software, the premise is that the network
must be connected from your devices.
You can also install DisplayLink software
through below steps.
Make sure [USB] is selected in the input
source list.
USB Type-A + DisplayLink driver
USB 3.2
Note: Compatible with USB 3.2 on DisplayLink, not USB 2.0.
DisplayLink installation procedure:
1. Double click Setup.exe file which is
available in CD disk or https://www.
displaylink.com/downloads.
12
≥4.5W
Advertisement
Table of Contents
