Xterra 1640755US Owner's Manual page 8

■ STEP 1
Remove all the parts from the carton and lay the main base frame on a flat level surface.
■ STEP 2
Feed the lower computer cable from the base frame (38) through the right upright (5) and
insert the upright (5) into the frame base tube (38). Be careful not to pinch the wire
harness.
Secure the side of the right upright using three 5/16" x
5/16" x 19mm flat washers (110). Secure the front of the upright using one 5/16" x
bolt (94) and one 5/16" x 19mm curved washer (95). Repeat for the left upright (4).
Ensure to tighten all eight bolts as tight as possible.
CUSTOMER SERVICE 1-888-707-1880
38
5
94
15mm
4
97
95
2
7
button head bolts (94), three
5
94
95
15mm
94
©
2012