Table of Contents
Advertisement
9.
Tie the cables with cable tie(s) and reinstall the front cover back into the chassis. For
more information, see steps 11 to 13 in the section Installing an ASUS PCIE-NVME4-
OCuLink card (for RS700-E9-RS12 only).
10. Reinstall the butterfly riser card bracket and the ASUS PCIE-NVME2-OCuLink card
assembly into the PCIE connector on the motherboard (A) and secure it with the screw
(B). Ensure that the golden connectors of the butterfly riser card bracket is firmly seated
in place.
2-36
Chapter 2: Hardware Information
Advertisement
Table of Contents
