Blomberg DWT 28500 W User Manual page 38

Hide thumbs Also See for DWT 28500 W:
Table of Contents

Advertisement

UPPER IMPELLER
Check if the holes on the upper
impeller (1) are clogged. If they
are clogged, remove and clean the
impeller. Turn its nut to left to remove
the upper impeller (A, B).
Make sure that the nut is tightened well
when installing the upper impeller.
1
C
CEILING IMPELLER
(MODEL DEPENDING)
Check if the holes on the top ceiling
impeller (1) of your machine are
clogged. If they are clogged, remove
and clean.
To remove them, slightly ( ) push them
upwards and then (
To install the impeller, seat it into its
slot, push slightly upwards and turn it
rightwards until it is securely tightened.
When the impeller is released, check if
it rotates without any obstruction.
A
1
B
35
USA
) turn left (A,B).
A
B
C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwt 28500 ssDwt 28500 b

Table of Contents