Table of Contents
Advertisement
Electrical Specifications
Video input signals
Input voltage/ frequency/current
Output voltage/ frequency/current
Inrush current
Power Consumption
As defined in EU 2019/2021 and EU 2019/2013.
1
Max brightness and contrast setting with maximum power loading on all USB ports.
2
P
: Power consumption of On Mode as defined in Energy Star 8.0 version.
3
on
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered and
shall have no obligation to update such information. Accordingly, the customer should not
rely upon this information in making decisions about electrical tolerances or otherwise. No
warranty as to accuracy or completeness is expressed or implied.
NOTE: This monitor is ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings which can be restored
by "Factory Reset" function in the OSD menu. Changing the factory default settings or
enabling other features may increase power consumption that could exceed the ENERGY
STAR specified limit.
• Digital video signal for each differential line
Per differential line at 100 ohm impedance
• DP/HDMI/USB Type-C signal input support
100-240 VAC / 50 or 60 Hz ± 3 Hz / 7.0 A (maximum)
100-240 VAC / 50 or 60 Hz ± 3 Hz / 2.0 A (maximum)
120 V: 42 A (Max.) at 0°C (cold start)
240 V: 80 A (Max.) at 0°C (cold start)
0.3 W (Off Mode)
1
0.5 W (Standby Mode)
170.0 W (On Mode)
1
430 W (Max)
2
138.4 W (P
)
3
on
Not Applicable (TEC)
1
3
About Your Display
|
15
Advertisement
Table of Contents
