Page 1
Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time. English Deutsch Español Italiano Português Français Nederlands ES-A190413-1...
Page 2
Read the manual carefully and ensure you have fully understood its contents before operating this device for the first time. English...
Page 3
Important Safety Instructions ▐ Important Notice Paragraphs beginning with the symbol indicate important instructions, tips or conditions for the following settings. For your own safety and the optimal performance of your TV, ensure to read the safety instructions before performing any installation. It is not guarantee operation and performance of peripheral devices made by other manufacturers.
Page 4
Important Safety Instructions The intended use and ambient conditions for this TV This TV is intended for the rendering of video and audio signals, on a table-top or wall- mounted, in a home or office environment. It must not be used in rooms with a high level of humidity or dust concentration.
Page 5
Important Safety Instructions Moving/Transportation Power plug and power cable Before moving this TV, disconnect all - Do not touch the power plug with wet cables and move in the vertical position hands. only. Grasp the device on the upper and - Do not place heavy objects on the lower edges of the frame.
Page 6
Important Safety Instructions Air ventilation and high Prevent small items from getting into the interior of the device through the ventilation temperatures slots. Such objects may cause short circuits, Install your TV only where there is proper which may cause fire. ventilation, and ensure that there is at least If something should get inside the unit, 10 cm free space on the sides and 20 cm...
Page 7
Important Safety Instructions If you have a cardiac pacemaker, keep a Supervision distance of at least 22 cm from the TV. Radio - Do not let children play unsupervised waves may interfere with the operation of a close to the TV. It could tip over, be pacemaker.
Page 8
Important Safety Instructions Cleaning and care Modification Do not attempt to modify this product CAUTION: in any way. Unauthorized modification Unplug the power cord prior to cleaning could void the warranty of this unit, cause the TV. electric shock and fires. Clean the TV, the screen, and the remote control with a soft, moist, clean and ...
Page 9
- There are static content of the application . SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Hisense Czech s.r.o declares that the radio equipment type [ERF6A62/ ERF6B62H/ERF6C62H/H55O8B/H55O8BE/H55O8BUK] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at...
Contents Product image is only for reference, actual product may vary in appearance. Parts of the software function changes with the system upgrade. OLED TVs are manufactured with the most sophisticated technology, but you may still see dark spots or bright spots in the panel (white, red, green or blue). This is caused by the OLED screen structure characteristics, not the TV breakdown, and they will not affect performance and reliability.
Installing the Stand or Wall mount bracket Installing the Stand CAUTION Be sure to disconnect the A/C power cord before installing a stand or Wall-Mount brackets. The screen is very fragile, and must be protected at all times when installing the base stand.
Page 12
Installing the Stand or Wall mount bracket 4. Install the Base Cover downward at the place shown in the illustration. Base Cover Arranging the power cable 1. Remove the Side Cap from the Base Stand, and then a Cable Clamp in the Base Stand will help you to arrange the power cable.
Page 13
Installing the Stand or Wall mount bracket 3. Press the top and back of Side Cap until the completion of installing Side Cap. Press Side Cap Power Cable Installing the wall mount bracket (not included) Wall mount hole pattern VESA (mm) 300 ×...
TV Front TV Front TV Bottom Panel TV Back View Remote sensor / Power indicator Item Description Receive remote signals from the remote control. Remote sensor Do not put anything near the sensor, as its function may be affected. Power indicator The light is red in standby mode.
TV Rear TV Rear Nameplate AC INPUT DIGITAL AUDIO OUT HDMI 4 (4K@60Hz) VIDEO AV IN NOTES ANT2 Jack supports power supply for satellite antenna (13/18V, 0.5A max.) Check the jacks for position and type before making any connections. Loose connections can result in image or color problems.
Making Connections Wired setup LAN ( Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below. · We recommend to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP).
Page 17
Making Connections Outdoor Antenna Cable ANT OUT ANT 1 DVB-T/T2/C Antenna Cable (75Ω) (not included) VHF/UHF Antenna ANT 2 DVB-S/S2 (not included) Satellite antenna Audio Amplifier/Speaker DIGITAL DIGITAL AUDIO OUT AUDIO OUT DIGITAL AUDIO cable (not included) Audio Amplifier/Speaker HDMI HDMI (ARC) HDMI...
Page 18
Making Connections CAM CARD SMART CARD NOTES Before you insert/remove the CI+ module, ensure that the TV is switched off. Then insert the CI card into the CI+ module in accordance with the Service Provider’s instructions. COMMON Do not repeatedly insert or remove the Common Access INTERFACE Module as this may damage the interface and cause a malfunction.
Remote Control POWER: Switch the TV on or into standby mode INPUT: Select input sources INFO: Display the present program information All Apps Custom button to launch input or apps quickly Number button: Direct channel selection or numbers input GUIDE: Display the Electronic Program Guide (DTV mode) CH.List: Display the Channel List on the screen...
Page 20
Remote Control POWER: Switch the TV on or into standby mode INPUT: Select input sources INFO: Display the present program information TXT: Turn on/off the teletext function Custom button to launch input or apps quickly Sub.: Activate or deactivate the subtitle mode Number button: Direct channel selection or numbers input GUIDE: Display the Electronic Program Guide...
Page 21
Remote Control POWER: Switch the TV on or into standby mode INPUT: Select input sources Number button: Direct channel selection or numbers input GUIDE: Display the Electronic Program Guide (DTV mode) Subtitle: Activate or deactivate the subtitle mode Special function buttons Display the Quick setup menu TXT: Turn on/off the teletext function / <...
Page 22
Remote Control Installing Batteries in the Remote Control NOTE: Check information according to the actual remote control in the accessory bag. 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
Turning the TV on for the First Time Turning the TV on for the First Time 1. Connect the mains cable to the mains socket after you have completed all the connections. 2. The first time you turn the TV on, it will go straight into the Installation Guide. / <...
Specifications Features, appearance and specifications are subject to change without notice. 55" Item 48.3 × 27.8 × 2.3 inches Without Stand (1226 × 707 × 59 mm) Dimension (W × H × D) 48.3 × 29.7 × 10.7 inches With Stand (1226 ×...
Other Information Recycling/Licenses WEEE (Waste Electronic Electric Equipment) European Directive 2012/19/EU This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
Need help?
Do you have a question about the H55O8B and is the answer not in the manual?
Questions and answers