Cleaning And Care; Lint Filters; Removing The Fragrance Flacon; Removing Visible Lint - Miele TXD 160 WP Operating Instructions Manual

Heat-pump dryer
Hide thumbs Also See for TXD 160 WP:
Table of Contents

Advertisement

Cleaning and care

Lint filters

This tumble dryer has 2 lint filters in
the door opening: The upper and
lower lint filters trap lint produced
during the drying process.
Clean the lint filters after each drying
program. This prevents an extension
of the program duration.
Also clean the lint filters when the 
indicator light comes on.
To turn the  indicator light off:
 Open and close the door while the
dryer is switched on.

Removing the fragrance flacon

The intensity of the fragrance will be
reduced if the lint filters and plinth filter
are not cleaned.
 Remove the fragrance flacon. See
"Fragrance flacon", "Removing/
replacing the fragrance flacon".

Removing visible lint

Tip: You can also use a vacuum cleaner
so that you can remove the lint without
touching it.
 Open the door.
42
 Pull the upper lint filter forward to
remove it.
 Remove the lint (see arrows).

Advertisement

Table of Contents
loading

Table of Contents