Timer 13 - Related Registers - Infineon MOTIX TLE985xQX User Manual

Arm cortex-m0 microcontroller with lin and h-bridge nfet driver for automotive applications
Table of Contents

Advertisement

MOTIX™ TLE985xQX
Capture/Compare Unit 6 (CCU6)
18.10.3
Timer 13 – Related Registers
The generation of the patterns for a single channel pulse width modulation (PWM) is based on timer T13. The
registers related to timer T13 can be concurrently updated (with well-defined conditions) in order to ensure
consistency of the PWM signal. T13 can be synchronized to several timer T12 events.
Timer T13 supports only compare mode on its compare channel CC63.
Register T13 represents the counting value of timer T13. It can only be written while the timer T13 is stopped.
Write actions while T13 is running are not taken into account. Register T13 can always be read by software.
Timer T13 supports only edge-aligned mode (counting up).
Timer T13 Counter Register
CCU6_T13
Timer T13 Counter Register
15
Field
Bits
T13CV
15:0
Table 310
RESET of
CCU6_T13
Register Reset Type
RESET_TYPE_3
Timer T13 Period Register
Register T13PR contains the period value for timer T13. The period value is compared to the actual counter
value of T13 and the resulting counter actions depend on the defined counting rules. This register has a
shadow register and the shadow transfer is controlled by bit STE13. A read action by software delivers the
value which is currently used for the compare action, whereas the write action targets a shadow register. The
shadow register structure allows a concurrent update of all T13-related values.
CCU6_T13PR
Timer T13 Period Register
15
User Manual
Type
Description
rwh
Timer T13 Counter Value
This register represents the lower 8-bit counter value of timer
T13.
Reset Values
Reset Short Name
0000
RESET_TYPE_3
H
Offset
7C
H
T13CV
rwh
Reset Mode
Offset
28
H
T13PV
rwh
596
Reset Value
see
Table 310
0
Note
Reset Value
see
Table 311
0
Rev. 2.0
2023-08-09

Advertisement

Table of Contents
loading

Table of Contents