Nokia 3600 User Manual page 157

Note: To be able to use an infrared connection with Windows 2000, you
must first disable the Image Transfer application in the
Link software.
3 Double-click the
Connection Properties
4 Verify that the correct COM port is selected for the infrared connection.
If no port is selected, select the COM port with infrared as the
connection type. Note that you can select more than one COM port.
Note: If you cannot select the port you want to use, another PC application
is using that port. To use PC Suite with that port, you must either
close the other application or disable it temporarily.
5 Make sure that the infrared port of the phone faces the infrared port
of the PC and that they are within range of each other.
6 Activate the infrared connection of your phone. Go to Menu, open the
Connectivity folder, and select Infrared.
Use a Bluetooth connection
Before you can connect your phone to the PC via Bluetooth for the first time,
you must have provided a name for your phone to be used in a Bluetooth
connection. For instructions on giving a name to your phone, see the chapter
on connectivity in this user guide. Make sure that Bluetooth is activated on
the phone to make your phone discoverable and connectable.
To activate Bluetooth connectivity, go to Menu→ Connect.→ Bluetooth.
Then select Bluetooth→On. To make your phone discoverable, select
phone's visibility→
To establish a Bluetooth connection:
1 Make sure that a Bluetooth card is inserted in the PC card or
CompactFlash (CF+) slot and that the software provided with the
Bluetooth card is installed on the PC, or check that your PC includes
built-in support for Bluetooth. A serial port profile must exist for the
Bluetooth card on the PC. For further information, see the user
documentation provided with the Bluetooth card or PC.
PC Suite Connection icon
dialog box.
Shown to all in the Bluetooth menu.
[ 149 ]
Wireless
on the taskbar to open the
PC Suite
My