Husqvarna Z200 Operator's Manual page 3

Product overview
9
10 3
11
12
13
14
1. Control levers
2. Parking brake
3. Tracking control
4. Deck lifting lever
5. Fuses
6. Bypass linkage
7. Fuel shut-off valve
8. Fuel tank
9. Throttle control
10. Hour meter
11. Ignition switch
12. PTO button
13. Seat adjustment lever
14. Type plate
Steering controls
The direction of the product is controlled by the 2
control levers. Refer to
3 . The control levers can be moved forward and
1550 - 003 - 11.08.2023
7
8
Product overview on page
6
1 2
rearward from a neutral position. Refer to
the product on page 13 .
Operator Presence Control (OPC)
The OPC engages when the operator lifts from the
seat. The engine and the drive to the blades stop if
the blades are engaged or the parking brake is not
applied. Refer to
Ignition key
The ignition key has 4 positions:
• Start position (A)
• Run position (B)
• Headlight position (C)
• Stop position (D)
5
4
3
Operation conditions on page 8 .
To operate
3