Philips Alpha Series User Manual page 24

Anomalous deadbolt alert
Motion sensor alert
Attention
1. Once the smart door lock is restored to default settings, the PIR motion sensor is turned
off by default. In order to turn it on, please install the official app first and choose "Add a
device" on the first screen.After a successful intergration with smart door lock, please open
the setting page on app,go to "motion sensor alert" and turn it on.
2. The increasing operating frequency of video functions on the door lock
can increase the power consumption, so it is recommended to set the minimum
sensitivity level of the motion sensor, reducing the test times and power consumption.
22
Way to trigger: The deadbolt works abnormally
and causes a failure in locking or unlocking the
door.
Way to be alerted: Repeat alerts
Way to turn off: The alert will be automatically
turned off.
Way to trigger: When an unexpected person
enters the detected area and stays there over
the given time, an alert will be triggered.
Way to be alerted: The camera will capture a
PIR
short video and sent notifications to the mobile
sensor
app.
Way to turn off: The motion sensor alert turns
off by default. To use this function, you can turn
it on or off on the mobile app.