Page 1
Monitor Owner’s Manual (LED Monitor*) * LG LED Monitor applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 32GR93U www.lg.com...
TABLE OF CONTENTS LICENSE ........3 USING THE MONITOR ....15 - Connecting to a PC...........15 OPEN SOURCE SOFTWARE HDMI Connection NOTICE INFORMATION ....4 DisplayPort Connection - Connecting AV Devices ...........16 ASSEMBLING AND PREPARING 4 HDMI Connection - Supported Drivers and Software ......5 - Connecting Peripherals...........17 - Product and Button Description......5 USB Device connection...
LICENSE Each model has different licenses. Visit www.lg.com for more information on the license. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. The SuperSpeed USB Trident logo is a registered trademark of USB Implementers Forum, Inc.
• It is recommended that use the supplied components. • If you use generic cables not certified by LG, the screen may not display or there may be image noises. • Illustrations in this document represent typical procedures, so they may look different from the actual product.
Supported Drivers and Software Product and Button Description You can download and install the latest version from the LGE website (www.lg.com). Drivers and Software Installation Priority Monitor Driver Recommended OnScreen Control Recommended LG Calibration Studio Optional Joystick Button...
Moving and Lifting the Monitor How to Use the Joystick Button You can easily control the functions of the monitor by pressing the joystick button or When moving or lifting the monitor, follow these instructions to prevent the monitor moving it left/right/up/down with your finger. from being scratched or damaged and to ensure safe transportation, regardless of its shape or size.
Installing on a Table CAUTION • Lift the monitor and place it on the table in an upright position. Place the monitor • Avoid touching the monitor screen as much as possible. at least 100 mm (3.94 inches) away from the wall to ensure sufficient ventilation. - This may result in damage to the screen or some of the pixels used to create images.
Adjusting the Stand Height CAUTION Place the monitor mounted on the stand base in an upright position. • Unplug the power cord before moving or installing the monitor. There is risk of Handle the monitor with both hands for safety. electric shock.
Adjusting the Angle • Be careful not to touch or press the screen area when adjusting the angle of the monitor. Place the monitor mounted on the stand base in an upright position. Adjust the angle of the screen. The angle of the screen can be adjusted forward or backward from -5° to 15° for a comfortable viewing experience.
Pivot Feature Raise the monitor to the maximum height. The pivot feature allows the monitor to rotate 90° clockwise. Head Adjust the angle of the monitor in the direction of the arrow as shown in the figure. Stand WARNING • To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the stand does not make contact with the monitor.
Using the Kensington Lock Rotate the monitor clockwise as shown in the figure. The connector for the Kensington security system is located at the bottom of the monitor. For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website at http://www.kensington.com.
Installing the Wall Mount Plate Installing on the Wall This monitor meets the specifications for the wall mount plate or other compatible Install the monitor at least 100 mm (3.94 inches) away from the wall and leave devices. about 100 mm (3.94 inches) of space at each side of the monitor to ensure sufficient ventilation.
Page 13
The length of the screw may differ for each wall mounting bracket. Be sure to use A non-VESA standard screw may damage the product and cause the monitor the proper length. to fall. LG Electronics is not liable for any accidents relating to the use of non- standard screws. •...
Page 14
• Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or misuse of inappropriate components will not be covered by the product warranty. • When measured from the back of the monitor, the length of each installed screw must be 8 mm (0.3 inches) or less.
USING THE MONITOR Connecting to a PC • This monitor supports the *Plug and Play feature. • Illustrations in this manual may differ from the actual product. * Plug and Play: A feature that allows you to add a device to your computer without Press the joystick button, go to Settings →...
Connecting AV Devices DisplayPort Connection Transmits digital video and audio signals from your PC to the monitor. HDMI Connection NOTE HDMI transmits digital video and audio signals from your AV device to the monitor. • There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
Connecting Peripherals Connecting Headphones Connect peripherals to the monitor via the headphones port. USB Device connection NOTE The USB port on the product functions as a USB hub. • Peripheral devices are sold separately. To use USB 3.0, connect the A-B type USB 3.0 cable of the product to the PC. •...
USER SETTINGS Button Menu Status Description Main menu disabled Enables the main menu. NOTE Enters the Settings feature. (Holding down the button to turn off the monitor. You can • Your monitor’s OSD (On Screen Display) may differ Main menu enabled turn off the monitor this way at any time, including when the slightly from that shown in this manual.
Main Menu Features Main Menu Description Power Off Input Sets input mode. Power Off Turns off the monitor. Settings Input Game Mode Settings Configures the screen settings. Game Mode Sets the game mode for gaming. Exit Exit Exits the main menu.
User Settings Menu Settings To view the OSD menu, press the joystick button at the bottom of the monitor and then enter the Settings. Configure the options by moving the joystick up/down/left/right. To return to the upper menu or set other menu items, move the joystick to or pressing ( ) it.
Page 21
This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish Color Weakness between the two colors. Calibration 1 Adjusts to the calibrated screen. Calibration 2 NOTE • Calibration 1/Calibration 2 : Please install LG Calibration Studio to run calibration.
Page 22
Game Mode on HDR signal. Settings > Game Mode Description Gamer 1 In this mode, users can customize elements including game-related options. Gamer 1 and Gamer 2 picture modes allow you to save two sets of customized display settings, including game-related setup Gamer 2 options.
Page 23
Settings > Game Adjust Description Provides seamless and natural images by synchronizing the vertical frequency of the input signal with that of the output signal. CAUTION • Supported Interface: DisplayPort (Adaptive-Sync), HDMI (Variable Refresh Rate). • Supported Graphic Card: A graphic card that supports NVIDIA's G-SYNC or AMD’s FreeSync is necessary. Adaptive-Sync / •...
Page 24
Sets a response time for displayed pictures based on the speed of the screen. For a normal environment, it is recommended that you use Fast. For a fast-moving picture, it is recommended that you use Faster. Once Faster Mode is selected, Motion Blur may occur depending on the content. Response Time Faster Sets the response time to Faster.
Page 25
Settings > Picture Adjust Description Brightness Adjusts the brightness of the screen. Contrast Adjusts the contrast of the screen. Sharpness Adjusts the sharpness of the screen. Mode 1, Mode 2, The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the Mode 3 lighter the image becomes.
Page 26
Provides extended contrast and gradation on a dark screen depending on game or video content. Faster Preferably for PC gaming experiences. Fast Preferably for console gaming experiences. Normal Preferably for playing video content and internet or word-processing. Disables the Variable Backlight feature. Variable Backlight NOTE •...
Page 27
Settings > Input Description Input List Selects the input mode. Adjusts the aspect ratio of the screen. Aspect Ratio Full Wide Displays the video in widescreen, regardless of the video signal input. Input Displays the video in 4:3. When automatic input switch is set to On, display will automatically switch to new input when connected. Auto Input Switch Enables Auto Input Switch.
Page 28
Settings > General Description Language Sets the menu screen to the desired language. Hexagon Lighting You can turn on or off the lighting on the back of the monitor, and you can also select or adjust the lighting color. User-defined Key 1 You can customise the main menu to access your preferred menu easily.
Page 29
Please set the Input Compatibility Version to match the version of the connected external device. 2.1(PC)/2.1(AV)/1.4 HDMI If you want to use the HDR, select the Input Compatibility Version to 2.1(PC) or 2.1(AV). Input Compatibility 1.4(DSC)/1.4/1.2 DisplayPort Version If you want to use the HDR, select the Input Compatibility Version to 1.4(DSC) or 1.4. NOTE •...
Have you installed the display driver? • Be sure to install the display driver from our web site: http://www.lg.com. • Make sure to check if the graphics card supports Plug and Play function. Some features are disabled.
Page 31
The screen retains an image. Does image sticking occur even when the • Displaying a still image for a prolonged time may cause damage to the screen, resulting in the retention of the image. monitor is turned off? • To extend the lifetime of the monitor, use a screensaver. Screen display is unstable and shaky.
Page 32
NOTE • Vertical Frequency: In order to display an image, the screen must be refreshed dozens of times per second, like a fluorescent lamp. The number of times the screen is refreshed per second is called vertical frequency, or refresh rate, and is represented by Hz. •...
Page 33
The display color is abnormal. Does the display appear discolored • Set the color to 24 bit (true color) or higher. In Windows, go to Control Panel > Display > Settings > Color Quality. (The (16 colors)? settings may differ depending on the operating system (OS) you use.) Does the display color appear unstable or •...
PRODUCT SPECIFICATION LCD Screen Color Depth HDMI 8-bit/10-bit color is supported. DP (DisplayPort) 10-bit color is supported. Resolution Max Resolution 3840 x 2160 @ 144 Hz Recommended Resolution 3840 x 2160 @ 144 Hz Power Sources Power Rating 19 V 5.0 A Power Consumption On mode: 65 W (Typical)*...
Page 35
Weight (Without Packaging) With Stand 8.3 kg (18.2 lbs) Without Stand 6.0 kg (13.2 lbs) Specifications are subject to change without notice. The symbol means alternating current, and the symbol means direct current. The Power Consumption level can be different by operating condition and monitor setting. * The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
Factory Support Mode HDMI Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60.004 1280 x 720 1280 x 1024 79.976 75.025 1920 x 1080 67.5 1920 x 1080 66.587...
Page 37
DisplayPort Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60.004 1280 x 720 1280 x 1024 79.976 75.025 1920 x 1080 67.5 1920 x 1080 166.587 143.981 Recommended Timing...
Beep Guide Menu Location Menu Location Menu Location Game Mode Game Adjust - Response Time - Off 2 3 4 Picture Adjust - Gamma - Mode 3 3 4 3 Game Mode - Gamer1 Game Adjust - Crosshair Picture Adjust - Gamma - Mode 4 3 4 4 Game Mode - Gamer2 Game Adjust - Crosshair - Red Cross...
Page 41
Menu Location Menu Location Menu Location Picture Adjust - Six Color - Red 3 7 2 Picture Adjust - Six Color - Magenta 3 7 10 Input - Input List - HDMI 2 4 1 2 Saturation Slider Saturation Slider Input - Input List - DisplayPort 4 1 3 Picture Adjust - Six Color - Green Hue...
Page 42
Menu Location Menu Location Menu Location General - Hexagon Lighting General - User-defined Key 2 - Input 5 4 1 General - Power LED - Off 5 8 2 General - User-defined Key 2 - Game General - Hexagon Lighting - Static 1 5 2 1 General - Automatic Standby 5 4 2...
Page 43
Supplier’s Declaration of Conformity Trade Name Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located on the back and on one side of the product.
Need help?
Do you have a question about the UltraGear 32GR93U-B and is the answer not in the manual?
Questions and answers