Download Print this page

Sunnydaze Decor AGR-386 Manual

Trunk with handles

Advertisement

Quick Links

TRUNK WITH HANDLES
Carefully review assembly and care instructions before using this product. Save this document for future reference.
Assemble components on a soft, clean surface to avoid scratching or damaging the finish.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
HELPFUL HINTS
Sunnydaze Decor advises reviewing this manual fully, and assembling the unit soon after purchase.
Check that all parts are accounted for and familiarize yourself with the assembly before beginning.
CR540
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
AGR-386
SAVE THIS MANUAL FOR FUTURE REFERENCE.
/
/
Order/Customer Reference Number:
02/2023
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
2-PERSON
ASSEMBLY
RECOMMENDED
SCAN THIS CODE
WITH YOUR
SMARTPHONE
TO VIEW OUR
ASSEMBLY VIDEO
Page 1 / 10

Advertisement

loading
Need help?

Need help?

Do you have a question about the AGR-386 and is the answer not in the manual?

Questions and answers

Summary of Contents for Sunnydaze Decor AGR-386

  • Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
  • Page 2 INTRODUCTION Read the manual carefully to ensure you fully understand all use, care, assembly, and safety information. Assemble on a soft, flat, clean, and Read this manual carefully and dry surface. follow the assembly instructions in the order listed. Pay close Use a soft, protective barrier when attention to assembly drawings.
  • Page 3 COMPONENTS Inspect packaging to ensure all parts are accounted for before disposing of packing materials. Save the packing slip. Seq. Part Name Qty. Cap Panel Side Panel (L/R) Back Panel Front Panel Bottom Support Rail Short Trim Board (L/R) Long Trim Board (L/R) Bottom Panel Lid Support Rail Hardware...
  • Page 4 ASSEMBLY Carefully review all steps and fully understand assembly before beginning. IMPORTANT: Take care not to over-tighten screws as doing so may crack the wood or strip the screw hole, causing a weak connection and reduced stability. STEP 1 03: 2 04: 1 06: 1 A: 18...
  • Page 5 STEP 3 H: 6 IMPORTANT: Ensure components are installed in the correct direction, as shown in the diagram. Ensuring the bottom grooves align, secure two Side Panels (03) to Back Panel (04) using six M4.5x25mm Pan Screws (H). Ensuring the angled mounting holes face the bottom, align Bottom Support Rail (06) with the back panel, as shown. NOTE: The support rail will be secured in Step 6.
  • Page 6 STEP 5 05: 1 H: 6 Ensuring the bottom grooves align, secure Front Panel (05) using six M4.5x25mm Pan Screws (H). STEP 6 B: 2 Secure Bottom Support Rail (06) to the front and back panels using two M4.5x28mm Pan Screws (B). STEP 7 07: 2 H: 4...
  • Page 7 STEP 8 Assistance is recommended for this step. 08: 2 H: 8 Align two Long Trim Boards (08) with the bottom of the unit, as shown. Have an assistant firmly hold the trim boards in place to ensure they remain flush with the unit while hardware is secured.
  • Page 8 STEP 10 01: 1 10: 2 H: 6 K: 6 Lay Top (01) face-up on a clean, smooth surface. Align two Hinges (J) with the indents on the top and mostly fasten them using six M3.5x14mm Pan Screws (K). Turn the top over and align two Lid Support Rails approximately 5 inches (5in, 12.7cm) from each short edge of the top.
  • Page 9 STEP 12 Align the metal mounting plate of G: 8 Lid Support (L) with the indents on the underside of the lid and secure using two M3x16mm Flat Screws (G). Align plastic mounting bracket, at an angle, with the indents on the inside of the trunk and secure using two M3x16mm Flat Screws (G).
  • Page 10 SAFETY STATEMENTS & WARNINGS • Residential use only. Not for commercial or industrial use. • For indoor use only. • Ensure fittings are tight before use. Periodically check fitting to ensure they are tight. • Only use this unit on a flat, level surface. •...