Central Remote Controller
Register/Check Indoor Unit (Address Settings)
Obtain Address
Register the indoor unit to the unit.
If you will not change the Central control address
Set the Central control address with the local remote controller in advance.
If you will change the Central control address with the central controller, see "To change the Central control address (P.19)".
Indoor unit list screen
18
-EN
1
Select "Address Settings" on the "Servicing Menu"
screen and press [ ] (Confirm)
The "Address Settings" screen appears.
2
Press [˄] and [˅] to select the item, then press [ ]
(Confirm)
The screen of the selected item appears.
1
Select "Obtain Address" on the "Address Setting"
screen and press [ ] (Confirm)
The "Obtain Address" confirmation screen appears.
2
Press [˄] and [˅] to select "Yes", then press [ ]
(Confirm)
"Obtaining address...
screen appears.
• This operation will take several minutes.
• On the "Obtain Address" confirmation screen, press [
select "No" and press [
screen.
3
On the "Indoor unit list" screen, check that there is
no error in the number of connected units and the
displayed address, then press [ ] (Return)
The "Address Confirm" confirmation screen appears.
• Press [˄] and [˅] or [
4
Press [˄] and [˅] to select "Yes", then press [ ]
(Confirm)
After the "Address Settings
screen.
This completes "Obtain Address".
• Select "No" and press [
screen without registering indoor units.
" appears, and after a while, the "Indoor unit list"
] (Confirm) to return to the "Address Settings"
] (Control) to switch pages.
" screen, return to the "Servicing Menu"
] (Confirm) to return to the "Servicing Menu"
Installation Manual
] (Return) or