Setnotificationwnd Status Codes - Texas Instruments MSP-PRGS430 User Manual

www.ti.com
2.4.21 /FN0022/ SetNotificationWnd
SetNotificationWnd() enables the status notification of a window. Each time a notification of the status
window is necessary, the DLL sends a IMessageID message to the hWnd window. The execution status
of an operation is passed in the WParam of this message. Completion status of the current operation is
passed (0..100) in the LParam.
LONG SetNotificationWnd(LONG hWnd, LONG IMessageID)
hWnd
A window handle
ImessageID
A message identifier
Table 4 lists the status codes.
STATUS_CONNECTSPA
STATUS_CONNECTTARGET
STATUS_RELEASETARGET
STATUS_RELEASESPA
STATUS_RESETTARGET
STATUS_ERASE
STATUS_ERASECHECK
STATUS_PATTERNCHECK
STATUS_VERIFY
STATUS_PROGRAM
STATUS_READOUT
STATUS_BLOWFUSE
SLAU048I – August 2000 – Revised October 2018
Submit Documentation Feedback
Table 4. SetNotificationWnd Status Codes
Status
Copyright © 2000–2018, Texas Instruments Incorporated
WParam Current Operation
1 Connecting to SPA430
3 Connecting to target
5 Releasing target
7 Releasing SPA430
9 Resetting target
11 Erasing target
13 Erase checking target
15 Pattern checking target
17 Verifying target
19 Programming target
21 Reading target out
23 Blowing fuse
MSP430™ Microcontroller Serial Programming Adapter
Operation
23