Table of Contents
Advertisement
Printer Does Not Turn On
Press ON button.
Check1
Power Supply
Make sure power plug is securely connected to printer, and then turn on again.
Check2
Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn
Check3
on again.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
247
- Quick Links:
- Network Connection Tips
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PIXMA TS3522 and is the answer not in the manual?
Questions and answers
How can my printer all of a sudden go offline
my printer just prints a single black vertical line but does print a good test page
Where is the paper button on the TS3522 Canon printer?
How do I enlarge what I'm scanning?
To enlarge scans on the Canon PIXMA TS3522, use the Zoom function in the scanning software. Zoom rescans the document and displays a high-resolution image in the preview. Alternatively, you can use the Enlarge/Reduce option on the toolbar to quickly zoom in, but the resolution of the displayed image may be lower.
This answer is automatically generated
making a copy
To make a copy with the Canon PIXMA TS3522, place your original document face down on the scan glass. Press the Color or Black Start button to print the first side. If you need to copy both sides, flip the printed page over on the scan glass and press the Color or Black Start button again to copy the other side.
This answer is automatically generated
Can I scan a document to my computer from the printer?
Hi, i have an issue with my printer. The power button and triangle light just keep continuously blinking back and forth and i **** unable to print
PIXMA TS 3722 On the top left side of the printer, which button is the Setup button ? No button is labeled as a setup button
Error code e61
Error code E61 on the Canon PIXMA TS3522 means "Scanning original has failed." Support code: 3412.
This answer is automatically generated
Support Code 7500 just changed ink cartridge won't print keeps flashing P10 or it might be 10P light next to above ink color is flashing