Table of Contents
Advertisement
Installation
,
To avoid injury the holes for the
shipping struts must be covered
after the struts are removed.
^ Close the holes with the rotary
protectors as shown, making sure to
close the caps.
^ Fasten the shipping struts to the rear
of the washer. Make sure that the
catch at the top of the strut is hooked
above the holder.
,
Do not move the washer without
the shipping struts in place.
44
Installing the shipping struts
^ Reinstall the struts by reversing the
"Removing the shipping struts"
procedure.
Advertisement
Table of Contents
