Advertisement
DCU-11 Installation Guide for Windows® 2000
Important note:
To avoid loss of data, do not remove the USB data cable from the PC or the phone
during data transfer. Removing the cable during data transfer may cause unstable
operation of the Windows® Operating System.
NOTE: The phone does not have to be connected during installation.
1) Download the USB driver files from the Sony Ericsson Global Support Area to your
computer. IMPORTANT: Make note of location!!!
2) Attach the DCU-11 cable to an unused USB port of your computer.
3) The pop up window in Figure 1 displays:
Figure 1
4) Followed by the pop-up window in Figure 2.
5) Select Next (Figure 2).
Figure 2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Sony Ericsson DCU-11
- Page 1 Windows® Operating System. NOTE: The phone does not have to be connected during installation. 1) Download the USB driver files from the Sony Ericsson Global Support Area to your computer. IMPORTANT: Make note of location!!! 2) Attach the DCU-11 cable to an unused USB port of your computer.
- Page 2 6) Choose Search for a suitable driver…. and then select Next (Figure 3). Figure 3 7) Check Specify a location, and select Next (Figure 4). Figure 4...
- Page 3 8) Select Browse and point to the location where the driver files were copied to in step 1 and select OK (Figure 5). For this illustration, we made a folder called DCU11_drivers and put the driver files inside the folder. C:\DCU11_drivers Figure 5 9) To continue, select OK (Figure 5).
- Page 4 “System” icon. 2. Select the “Hardware” tab and then “Device Manager”. 3. The USB Cable DCU-11 can be found under “Ports”, with the COM-port number shown in parentheses. Note the COM-port number. It may be necessary to enable this device in “Phone Monitor Options”, found under “Control Panel”.
Need help?
Do you have a question about the DCU-11 and is the answer not in the manual?
Questions and answers