Operating Your Transmitter
Installing the Battery:
Install 9 volt battery (not included), to prevent
damage to transmitter, remove the battery if not
used for long periods. (Figure 21)
12 12
Restore power to the ceiling fan and test for
proper operation.
"HI, MED, LOW" buttons:
1.
These three buttons are used to set the fan
speed as follows:
LOW=Low speed,
MED= Medium speed
HI=High speed
"OFF" button:
2.
LIGHT
This button turns the fan off.
HI
OFF
The "LIGHT" button turns the light ON or
3.
MED
LOW
OFF.
9V
BAT.
Figure 21
LIGHT
HI
OFF
MED
LOW
9V
BAT.
Figure 22