Advertisement
Available languages
Available languages
Warranty
.........................................
2
Safety
Rules ......................................
2
Unpacking
.......................................
2
Assembly
......................................
2-3
Operation
......................................
3-4
Maintenance
.....................................
4
Parts
Illustration
and List ............................
4
Espa_ol
........................................
5-7
ONE-YEAR
FULL
WARRANTY
ON
CRAFTSMAN
TOOL
If this Craftsman
tool fails due to a defect
in material
or
workmanship
within
one year from the date of purchase
CALL
1-800-4-MY-HOME®
TO ARRANGE
FOR FREE REPAIR.
If this tool is used for commercial
or rental
purposes,
this war-
ranty will apply for only ninety days from the date of purchase.
This warranty
applies
only while this tool is in the United
States.
This warranty
gives you specific
legal rights
and you may also
have other rights,
which
vary, from state to state.
Sears,
Roebuck
and Co., Dept.
817WA,
Hoffman
Estates,
IL 60179
DANGER:
Do not use this dust collection
system
in a flam-
mable
or explosive
atmosphere.
Do not use to collect
metal
shavings
or dust. Consult
National
Fire Protection
Association
(NFPA)
standards
before
setting
up a dust collection
system,
especially
NFPA 664.
WARNING:
For your own safety
read all of the instructions
and precautions
before
operating
tool.
WARNING:
For your own safety
read all of the instructions
and precautions
for any dust collector
used with this system.
CAUTION:
Always
follow proper
operating
procedures
as
defined
in this manual
even if you are familiar
with use of this
or similar
tools. Remember
that being
careless
for even a
fraction
of a second
can result
in severe
personal
injury.
•
Do not use power tools
in dangerous
environments.
Do not
use power
tools in damp
or wet locations.
Do not expose
power
tools to rain.
•
Work
area should
be properly
lighted.
•
Proper
electrical
receptacle
should
be available
for tool.
Three
prong
plug should
be plugged
directly
into properly
grounded,
three-prong
receptacle.
•
Extension
cords
should
have a grounding
prong and the
three
wires of the extension
cord should
be of the correct
gauge.
•
Keep visitors
at a safe distance
from work area.
•
Keep children
out of workplace.
Make workshop
childproof.
Use padlocks,
master
switches
or remove
switch
keys to pre-
vent any unintentional
use of power tools.
DANGER:
The operation
of any power
tool can result
in for-
eign objects
being thrown
into the eyes, which
can result in
severe
eye damage.
Always
wear safety
glasses
complying
with United
States
ANSI
Z87.1
(shown
on package)
before
commencing
power tool operation.
Check for shipping
damage.
If damage
has occurred,
a claim
must be filed with the carrier
immediately.
Check
for complete-
ness. immediately
report
any missing
parts
to dealer.
Remove
all components
of shop dust collection
system
from shipping
carton.
Refer to Figure
2.
Locate
and account
for the following
components:
*
2_/2x 24" Flexible
hose (Key No. 1)
*
Connector
(12 each,
Key No. 2)
*
45 ° Elbows
(2 each,
Key No. 3)
*
2_/2x 22" Plastic
straight
pipe (4 each,
Key No. 4)
*
Hangers
(8 each,
Key No. 5)
*
Plastic
"T" fittings
(3 each,
Key No. 6)
*
Blast gates
(4 each,
Key No. 7)
*
2W' Hose clamp
(10 each,
Key No. 8)
*
2_/2x 72" flexible
hose (4 each,
Key No. 9)
*
Grounding
kit (not shown)
*
Hardware
bag (not shown)
BE
PREPARED
FOR
JOB
•
Wear proper
apparel.
Do not wear
loose clothing,
gloves,
neckties,
rings,
bracelets
or other jewelry
which
may get
caught
in moving
parts
of machine.
•
Wear protective
hair covering
to contain
long hair.
•
Wear safety shoes
with non-slip
soles.
•
Wear safety glasses
complying
with
United
States ANSI
Z87.1.
Everyday
glasses
have only impact
resistant
lens-
es. They
are NOT safety glasses.
•
Wear face mask or dust mask if operation
is dusty.
•
Be alert and think clearly.
Never operate
power
tools when
tired,
intoxicated
or when taking
medications
that cause
drowsiness.
PREPARE WORK AREA FOR JOB
•
Keep work area clean. Cluttered
work areas
invite
accidents.
TOOLS
NEEDED
•
Phillips
Head Screwdriver
•
Portable
Drill
•
_/4" Drill Bit
•
W' Drill Bit
•
Hammer
NOTE:
For masonry
walls,
use sixteen
(16) masonry
anchors
and masonry
drill bit of proper
size for anchors
(not supplied).
SELECT
SITE
FOR
SHOP
DUST
COLLECTION
SYSTEM
Refer to Figure
2.
Site for the Shop
Dust Collection
System
should
be located
as close
to the woodworking
machines
as possible.
Dust
Collector
should
be to the Left or Right
of the machines
and
Shop
Dust Collector
System
should
branch
out to each
@Sears, Roebuck and Co.
2
Advertisement
