Table of Contents
Advertisement
To check or clean the filter system:
Unscrew the Large Object Trap as
1.
illustrated and remove the entire
filter system.
Remove any residue and clean
2.
filters by rinsing under running
water. Note: do not use abrasive
brushes or steel wool, etc., as
they may damage the filter.
Reinstall the filter system in
3.
reverse sequence and lock into
place by screwing the Large
Object Trap until the marking
arrows align.
Care and Maintenance en-us
Spray arms
Check spray arms 1:, 1R for
grease and limescale deposits. If you
find such deposits:
Fill detergent dispenser 92 with
■
detergent and start the appliance
without utensils in the cycle with
the highest rinsing temperature.
~ "Wash Cycle Information"
on page 24
Clean the appliance with
■
detergents/appliance cleaners
which are particularly suitable for
use with dishwashers.
Unscrew the upper spray arm
■
1: and pull off the lower spray
1R arm as shown. Inspect for
deposits.
9001238233
9/96
31
Advertisement
Table of Contents
