Fujitsu Cremson Series User Manual page 23

There is no picture on my VGA-
monitor
Hardware units of the CPU such
as LEDs, user buttons, UART0
or CAN are not working.
The video input does not work
For more information see the the provided manuals, last minute
information and additional or updated documentation on our web-site.
* Make sure all jumpers on both
boards are set correctly (see board-
manuals)
* Make sure you are using a VGA-
cable with all lines (including C-sync)
connected 1:1 !
* Make sure you have enabled these
units on the evaluation board using the
appropriate jumpers. See the hardware
manual for information on how to control
the peripherals.
* Make sure you have the right settings
for the SAA7111 video decoder.
page -23-