Samsung DW60M5050 Series User Manual page 40

Hide thumbs Also See for DW60M5050 Series:

Installing your dishwasher

STEP 5. DISHWASHER INSTALLATION

1. Install the furniture door to the outer door of the dishwasher using the brackets provided. Refer to the

template for positioning of the brackets. (For Fully built in and Semi built in dishwasher)

2. Adjust the tension of the door springs by using an Allen key turning in a clockwise motion to tight en the

left and right door springs. Failure to do this could cause damage to your dishwasher. (For Fully built in

and Semi built in dishwasher)

3. Connect the inlet hose to the cold water supply.

4. Connect the drain hose. Refer to diagram.

5. Connect the power cord.

6. Affi x the condensation strip under the work surface of cabinet. Please ensure the condensation strip is

ﬂ ush with edge of work surface.

7. Place the dishwasher into position.

8. Level the dishwasher. The rear foot can be adjusted from the front of the dishwasher by turning the Allen

screw in the middle of the base of dishwasher use an Allen key. To adjust the front feet, use a ﬂ at screw

driver and turn the front feet until the dishwasher is level.

9. The dishwasher must be secured in place. There are two ways to do this:

A. Normal work surface : Put the installation hook into the slot of the side plane and secure it to the

work surface with the wood screws.

B. Marble or granite work top : Fix the side with Screw.

40_ Installing your dishwasher

DW5500MM_DD81-02615E-00_EN.indd 40

2018-11-29

10:51:43

Dw60m5070 series 5 series Dw60m5050fs Dw60m5050fw